Supply Solar is your partner on the ground in China giving you a direct link to the manufacturer of solar products. This means you are able to buy at the absolute best prices.
Your Grow Room environment should be one of your first considerations for a successful hydroponics setup.
If you provide your plants with plenty of fresh air, you effectively guarantee a generous supply of carbon dioxide, which plants need for their healthy growth and development.
Proper ventilation in your hydroponic growing area or tent is essential for healthy plant growth. For your plants to develop as they should, it is necessary to clean the air and remove any nasty particles from the environment as much as possible.
Air constantly circulating within any given confined space will also be a good defence against the various biological hazards that can develop over time.
There are well-known diseases that affect plants. These can be kept at bay and under check better if you have a gentle breeze that does not permit local buildup of the kind of micro-organism and bacteria that cause these diseases in the first place or allow them to flourish.
PERC Solar Panel – 370W – 670W
TopCON Solar Panel – 410W – 630W
HJT Solar Panel – 625W – 715W
Small Solar Panel – 40W – 380W
Grow lights in hydroponics are an essential part of any growing system. There are several different types of grow lighting systems and grow lamps available on the market, so be careful when choosing the grow light to use with your hydroponic method and size of installation.
Grow lights in hydroponics come in many shapes, functions and sizes. Many of these may be used successfully in your hydroponics system. The three main categories are fluorescent, high-intensity discharge (HID) and light-emitting diode (LED).
Fluorescent grow lights. This light is the most popular among hydroponic growers because of its relatively low cost and efficiency.
There are two subsets of the fluorescent grow light types: compact fluorescent light (CFL) and tube-style light.
Compact Fluorescent Lights (CFL). CFLs are relatively inexpensive bulbs which can be very versatile in their shape. CFLs are a good choice for minor hydroponic installation because they don’t heat up to a great extent, so you can safely place them next to your plants.
Tube-Style Fluorescent. Tube-style fluorescent lights are available in several different specific types. Tube-style fluorescent lights are wider than their CFL counterparts, generally arranged in parallel rather than in series, and mounted on a sturdy fixed board.
High-Intensity Discharge Grow Lights (HID). HID lights are generally more efficient than fluorescent lights but release more heat; they need continual ventilation. Of these, there are three sub-varieties:
High-Pressure Sodium Lights (HPS). HPS lights give off reds and yellows on the whole colour spectrum. Because of this, HPS grow lights are used more often during the fruiting and flowering stages of plants.
Metal Halide Lights (MH). These emit light within the blue range of the spectrum. Because of this, MH lights are well-suited for the vegetative stages in the life cycle of plants.
Ceramic Metal Halide Lights (CMH). These are similar to MH grow lights on first seeing them. But CMH lights have a broader colour spectrum range than both MH and HPS lights, and they last longer.
Light Emitting Diodes (LED). LEDs are very efficient compared to all the other types of grow light; LEDs emit a large amount of light while only needing very little electricity. They are very lightweight and do not emit much heat. These lights consist of lots of small diodes which produce light. These grow lights may be sourced and arranged to make specific colours on the spectrum.
Lead-acid Battery
Gel battery
OPzV BATTERY
Wall Mounted
Floor Mounted
Stackable
Rack Type
Grow lights in hydroponics are an essential part of any growing system. There are several different types of grow lighting systems and grow lamps available on the market, so be careful when choosing the grow light to use with your hydroponic method and size of installation.
Grow lights in hydroponics come in many shapes, functions and sizes. Many of these may be used successfully in your hydroponics system. The three main categories are fluorescent, high-intensity discharge (HID) and light-emitting diode (LED).
Fluorescent grow lights. This light is the most popular among hydroponic growers because of its relatively low cost and efficiency.
There are two subsets of the fluorescent grow light types: compact fluorescent light (CFL) and tube-style light.
Compact Fluorescent Lights (CFL). CFLs are relatively inexpensive bulbs which can be very versatile in their shape. CFLs are a good choice for minor hydroponic installation because they don’t heat up to a great extent, so you can safely place them next to your plants.
Tube-Style Fluorescent. Tube-style fluorescent lights are available in several different specific types. Tube-style fluorescent lights are wider than their CFL counterparts, generally arranged in parallel rather than in series, and mounted on a sturdy fixed board.
High-Intensity Discharge Grow Lights (HID). HID lights are generally more efficient than fluorescent lights but release more heat; they need continual ventilation. Of these, there are three sub-varieties:
High-Pressure Sodium Lights (HPS). HPS lights give off reds and yellows on the whole colour spectrum. Because of this, HPS grow lights are used more often during the fruiting and flowering stages of plants.
Metal Halide Lights (MH). These emit light within the blue range of the spectrum. Because of this, MH lights are well-suited for the vegetative stages in the life cycle of plants.
Ceramic Metal Halide Lights (CMH). These are similar to MH grow lights on first seeing them. But CMH lights have a broader colour spectrum range than both MH and HPS lights, and they last longer.
Light Emitting Diodes (LED). LEDs are very efficient compared to all the other types of grow light; LEDs emit a large amount of light while only needing very little electricity. They are very lightweight and do not emit much heat. These lights consist of lots of small diodes which produce light. These grow lights may be sourced and arranged to make specific colours on the spectrum.
Off grid
On grid
Hybrid
MPS
Grow lights in hydroponics are an essential part of any growing system. There are several different types of grow lighting systems and grow lamps available on the market, so be careful when choosing the grow light to use with your hydroponic method and size of installation.
Grow lights in hydroponics come in many shapes, functions and sizes. Many of these may be used successfully in your hydroponics system. The three main categories are fluorescent, high-intensity discharge (HID) and light-emitting diode (LED).
Fluorescent grow lights. This light is the most popular among hydroponic growers because of its relatively low cost and efficiency.
There are two subsets of the fluorescent grow light types: compact fluorescent light (CFL) and tube-style light.
Compact Fluorescent Lights (CFL). CFLs are relatively inexpensive bulbs which can be very versatile in their shape. CFLs are a good choice for minor hydroponic installation because they don’t heat up to a great extent, so you can safely place them next to your plants.
Tube-Style Fluorescent. Tube-style fluorescent lights are available in several different specific types. Tube-style fluorescent lights are wider than their CFL counterparts, generally arranged in parallel rather than in series, and mounted on a sturdy fixed board.
High-Intensity Discharge Grow Lights (HID). HID lights are generally more efficient than fluorescent lights but release more heat; they need continual ventilation. Of these, there are three sub-varieties:
High-Pressure Sodium Lights (HPS). HPS lights give off reds and yellows on the whole colour spectrum. Because of this, HPS grow lights are used more often during the fruiting and flowering stages of plants.
Metal Halide Lights (MH). These emit light within the blue range of the spectrum. Because of this, MH lights are well-suited for the vegetative stages in the life cycle of plants.
Ceramic Metal Halide Lights (CMH). These are similar to MH grow lights on first seeing them. But CMH lights have a broader colour spectrum range than both MH and HPS lights, and they last longer.
Light Emitting Diodes (LED). LEDs are very efficient compared to all the other types of grow light; LEDs emit a large amount of light while only needing very little electricity. They are very lightweight and do not emit much heat. These lights consist of lots of small diodes which produce light. These grow lights may be sourced and arranged to make specific colours on the spectrum.
Domestic
Industrial
Grow lights in hydroponics are an essential part of any growing system. There are several different types of grow lighting systems and grow lamps available on the market, so be careful when choosing the grow light to use with your hydroponic method and size of installation.
Grow lights in hydroponics come in many shapes, functions and sizes. Many of these may be used successfully in your hydroponics system. The three main categories are fluorescent, high-intensity discharge (HID) and light-emitting diode (LED).
Fluorescent grow lights. This light is the most popular among hydroponic growers because of its relatively low cost and efficiency.
There are two subsets of the fluorescent grow light types: compact fluorescent light (CFL) and tube-style light.
Compact Fluorescent Lights (CFL). CFLs are relatively inexpensive bulbs which can be very versatile in their shape. CFLs are a good choice for minor hydroponic installation because they don’t heat up to a great extent, so you can safely place them next to your plants.
Tube-Style Fluorescent. Tube-style fluorescent lights are available in several different specific types. Tube-style fluorescent lights are wider than their CFL counterparts, generally arranged in parallel rather than in series, and mounted on a sturdy fixed board.
High-Intensity Discharge Grow Lights (HID). HID lights are generally more efficient than fluorescent lights but release more heat; they need continual ventilation. Of these, there are three sub-varieties:
High-Pressure Sodium Lights (HPS). HPS lights give off reds and yellows on the whole colour spectrum. Because of this, HPS grow lights are used more often during the fruiting and flowering stages of plants.
Metal Halide Lights (MH). These emit light within the blue range of the spectrum. Because of this, MH lights are well-suited for the vegetative stages in the life cycle of plants.
Ceramic Metal Halide Lights (CMH). These are similar to MH grow lights on first seeing them. But CMH lights have a broader colour spectrum range than both MH and HPS lights, and they last longer.
Light Emitting Diodes (LED). LEDs are very efficient compared to all the other types of grow light; LEDs emit a large amount of light while only needing very little electricity. They are very lightweight and do not emit much heat. These lights consist of lots of small diodes which produce light. These grow lights may be sourced and arranged to make specific colours on the spectrum.
Roof – Tile, asphalt, metal
Ground – Screw, pile, concrete block
Contact us for your FREE no obligation product consultation and find out the all in cost to get your product to your door
201-03
Building F1
Jinyucheng Industrial Park
Sabian Street
Shenzhen
China
77 Lianyun Road
Yangzhou City
Jiangsu Province
China
201-03
Building F1
Jinyucheng Industrial Park
Sabian Street
Shenzhen
China
77 Lianyun Road
Yangzhou City
Jiangsu Province
China
